أنابيب ومواسير ولفائف ووصلات نحاسية
استعرض
Product Hierarchy
Calculate Weight for Project BOM
Brass Pipes & Tubes Sub-Categories
Precision brass tubing for heat exchangers, marine service, plumbing components, furniture fixtures and industrial engineering since 1966.
R V Metal Corporation supplies brass pipes and tubes in seamless and welded/extruded forms (as applicable by size and specification) for heat exchanger and condenser systems, marine environments, plumbing components, decorative/furniture applications and general engineering. Brass selection is not “one-grade-fits-all” — the alloy is chosen based on corrosion media, dezincification risk, strength requirements, forming needs (bending/drawing) and machining performance. C26000 (Cartridge Brass 70/30) is widely used for deep drawing and forming. C27200 (Common Brass 63/37) is a cost-effective general-purpose brass for tube and pipe applications. For marine hardware and higher corrosion resistance in seawater-related service, C46400 (Naval Brass) is commonly specified. For condenser/heat exchanger tubing, industry often specifies dedicated condenser brass families (e.g., Admiralty / Aluminium Brass) depending on service water quality and velocity.
| Parameter | Specification |
|---|---|
| Alloys (Common) |
C26000 – Cartridge Brass (70/30) for forming/drawing C27200 – Common Brass (63/37) general-purpose tube/pipe alloy C46400 – Naval Brass for marine/corrosion-resistant service Also supplied: condenser/heat exchanger brass families (e.g., Admiralty / Aluminium Brass) as per customer standard and service conditions. |
| Standards | ASTM / EN / IS supported (as applicable). Share your drawing/spec to lock chemistry, tolerances, temper and test plan. |
| Temper / Condition | Soft / Annealed (O) • Half-Hard (1/2H) • Hard (H) (availability depends on alloy + size) |
| Size Range (OD) | As per order — round, square and rectangular tubes supported. Provide OD/WT in inches (in) or millimetres (mm) and length in m/ft. |
| Units | All dimensions supported in mm and inches on drawings, MTC and packing lists |
| Testing (on request) | Dimensional checks • Eddy current (where required) • Hydro/pressure test (where specified) • Visual/surface checks • MTC |
| Element | Typical (guide) |
|---|---|
| Cu | ~ 70% |
| Zn | ~ 30% |
| Notes | High formability; widely used for drawn and formed brass components. |
| Element | Typical (guide) |
|---|---|
| Cu | ~ 63% |
| Zn | ~ 37% |
| Notes | General-purpose brass with balanced cost and mechanical performance. |
| Element | Typical (guide) |
|---|---|
| Cu | Balance (approx. 60%) |
| Zn | Balance |
| Sn | ~ 1% (improves seawater resistance) |
| Notes | Used for marine fittings and service requiring improved corrosion resistance. |
توفر آر ڤي ميتال كوربوريشن مجموعة متكاملة من منتجات النحاس والنحاس الأصفر والكوبرونيكل وسبائك النحاس والألمنيوم والفولاذ المقاوم للصدأ — يتم تصنيعها وتوريدها وفقًا للمعايير العالمية ASTM وEN وBS وIS.
سواء كنت تحتاج إلى أنابيب نحاس لأنظمة التكييف HVAC، أو أنظمة الغازات الطبية MGPS، أو التبريد، أو المبادلات الحرارية، أو حلول سبائك النحاس المُصممة حسب الطلب — فريقنا يرد بسرعة، ويشارك البيانات الفنية، ويقدم تسعيراً تنافسياً للتصدير إلى دول الخليج.
توريد وتصدير إلى: السعودية، الإمارات، قطر، الكويت، البحرين، عُمان.
117، شارع كيكا، جولالوادِي،
مومباي – 400004، ماهاراشترا، الهند
هاتف: +91 22 6636 3026
البريد الإلكتروني:
info@rvmetco.com
رقم المسح 43/1، مجمع سواستيك، أتاك باردي، طريق دارامبور، فالساد: 396001، غوجارات، الهند
هاتف: +91 97573 74689
البريد الإلكتروني:
rvmetco@gmail.com